Anterwell Technology Ltd.
Large Original stock of IC Electronics Components, Transistors, Diodes etc.
High Quality, Reasonable Price, Fast Delivery.
Product Details:
Payment & Shipping Terms:
|
DC Supply (reference To GND): | 4.0 V | Input Voltage, TTL Pins: | GND -0.3 To 5.5 V |
---|---|---|---|
Input Voltage, Other Pins: | GND -0.3 To VCC +0.3 V | Input Current, Any Pin: | -10 To 25 MA |
Storage Temperature: | -65 To 150 °C | Ambient Operating Temperature: | -40 To 85 °C |
Highlight: | programming ic chips,ic programmer circuit |
LXT6155LE popular Programmable IC Chips 155 Mbps SDH / SONET / ATM Transceiver
The LXT6155 is a high speed fully integrated transceiver designed for 155 Mbps SDH/SONET/ ATM transmission system applications. The LXT6155 provides a LVPECL interface for fiber optics modules, and a CMI interface for coax cable drive. These circuits are implemented using Level One’s proven low power 3.3V CMOS analog and digital circuits.
The transmitter incorporates a parallel-to-serial converter, a frequency multiplier PLL, CMI line encoders, and line interfaces for both coax cable and optical fiber. The receiver incorporates an adaptive equalizer, a clock recovery PLL, Loss of Signal (LOS) detector, CMI and NRZ decoders, a serial-to-parallel converter, and an SDH/SONET frame byte detector/aligner. At the system interface, the LXT6155 offers both parallel 8-bit and serial differential interfaces. The LXT6155 also operates in either Hardware stand-alone mode or Software mode. Software mode is controlled by a serial microprocessor (µP) to program formats and operating/test modes.
Applications
Features
* Complies with:
—Bellcore SONET GR-253
—ITU-T G.703/813/958 STM1
* Two line interface formats:
—Fiber LVPECL NRZ
—Coax CMI
* Transmit synthesizer PLL
* Receive clock recovery PLL
* Adaptive CMI equalizer
* Analog circuitry for transformer drive
* Programmable LOS function
* CMI encoder and decoder
* Serial/Parallel and Parallel/Serial conversion
* Byte alignment for SDH/SONET frames
* Two modes of operation:
—Microprocessor controlled; software mode
—Stand-alone; hardware mode
* No external crystal required. A 19.44 MHz crystal is optional
* Low power consumption (less than 760 mW typical)
* Operates from a single 3.3 V supply
* 64 pin LQFP package
Absolute Maximum Ratings
Parameter | Sym | Min | Max | Unit |
DC supply (reference to GND) | Vcc | 4.0 | V | |
Input voltage, TTL pins | Vin (TTL) | GND -0.3 | 5.5 | V |
Input voltage, other pins | Vin | GND -0.3 | VCC +0.3 | V |
Input current, any pin | Iin | -10 | 25 | mA |
Storage temperature | Tstg | -65 | 150 | °C |
CAUTION:
Operating at or beyond these limits may result in damage to the device. Normal operation not guaranteed at these extremes.
Figure 1. LXT6155 Block Diagram
LXT6155 Pin Assignments
LXT6155LE Package Specification
High Power Rectifier Diode 1N4756A , Silicon Planar Zener Diodes
Bridge Type Rectifier Diode 1N4007 50 to 1000 Volts 1.0 Ampere
1N4742A Silicon Planar Zener Diodes for Stabilized Power Supply
Power Programmable IC Chips XC6SLX100-3FGG484C Spartan-6 Family Overview
128K Bytes Sound IC Chip Programming ATMEGA128-16AU 8 Bit Microcontroller
EMC Programmable IC Chips Compliant Slew Rate Limited EI , Timer IC Chip
SMD Power Mosfet Module L7812CV TO-220 Power Trans Electronic Compoents
2SD1594 3 Pin Transistor NEC NPN Power Transistor Switching High Speed
2N5459 Power Mosfet Transistor N-Channel To-92 Original Stock FSC